Power over Ethernet Wall Plug Adapter

Power over Ethernet Wall Plug Adapter

October 9, 2020
TeamViewer IoT Documentation

The Power over Ethernet Wall Plug Adapter (POE) is used to connect the Edge Gateway with a power supply (e.g. wall socket).

See Attached Files to download the full documentation.

Safety Approvals

  • cUL / UL
  • CE
  • SAA
  • C-Tick


units in mm (inch)

Dimensions and Weight

  • Length: 80mm (3.15in)
  • Width: 45mm (1.77in)
  • Height: 33mm (1.29in)
  • Weight: 95g (3.35oz.)
  • Data in/Output Connector: RJ45

Output Connections

  • Output Connection (Standard Model): +pin 4, 5 / -pins 7, 8
  • Output Connection (GigabitModel): +pin 3, 6 / -pins 1, 2

Output Specifications

DC Output VoltageLoad Min.Load Max.Regulation LineRegulation LoadOutput Power
56 V0 A0.275 A±4 %±4 %15.4 W



AC Input Voltage Range90 to 264 VAC
AC Input Voltage Rating100 to 240 VAC
AC Input Current0.8 A (RMS) maximum for 90 VAC
0.5 A (RMS) maximum for 240 VAC
Leakage Current0.25 mA maximum @ 254 VAC, 60 Hz
AC Input Frequency47-63 Hz
AC Inrush Current15 A (RMS) maximum for 115 VAC
20 A (RMS) maximum for 230 VAC


Total Output Power15.4 W
Ripple and Regulation150 mV maximum
Efficiency75 % (typical) at maximum load, and 120 VAC, 60 Hz
Transient O/P Voltage Protection60 V maximum at switch on/off at any AC line phase
Hold-up time16 mS minimum at maximum load and 120 VAC, 60 Hz


TemperatureOperation: 0 to +40 °C
Non-operation: -25 to +65 °C
HumidityOperation: 5 to 90 %
EMCFCC Part 15 Class B
EN55022 Class B
Immunity EN50082-1ESD: EN61000-4-2. Level 3
RS: EN61000-4-3. Level 2
EFT: EN61000-4-4. Level 2
Surge: EN61000-4-5. Level 3
CS: EN61000-4-6. Level 2
Voltage Dips EN61000-4-11
Harmonic: EN61000-3-2 Class A
Isolation TestPrimary to Secondary: 3000 VAC for 1 second 10 mA
Insulation ResistancePrimary to Secondary: >10 M OHM 500 VDC

Attached Files

Related posts

Want more? Exclusive deals, the latest news: Our Newsletter!