Skip to main content

How to reset your router and fix common internet problems

Three smart devices connected through a digital network, exchanging data in a futuristic, tech-inspired environment.
Method 1
  1. Unplug both your modem and your router. Find the power cords connected to the back of each device and unplug them from the electrical outlet. Simply turning them off with a power button may not be sufficient.
  2. Wait for 60 seconds. This pause is critical. It ensures that the internal components, particularly the capacitors, fully discharge and that all volatile memory is cleared.
  3. Plug the modem in first. Reconnect the power to your modem only. Allow it several minutes to boot up and establish a stable connection with your internet service provider (ISP). You will see the lights on the front blink and then become solid.
  4. Plug the router in. Once the modem's lights are stable, reconnect the power to your WiFi router. It will also need a few minutes to boot up, receive an IP address from the modem, and begin broadcasting its network.
  5. Test your connection. Once the router's lights are stable, try connecting a device to the network and browsing to a website like ‘https://www.google.com’.
Method 2
  1. Back up your configuration (if possible). If you can still access the router's admin panel, navigate to the administration or system tools section and look for an option to save or back up your current settings. This can save significant time during reconfiguration.
  2. Locate the reset button. With the router powered on, find the reset button. It is almost always a small, recessed button located on the back or bottom of the router, designed to prevent accidental presses. You will need a paperclip or a similar pointed object to press it.
  3. Press and hold the button. Firmly press and hold the reset button for 15-30 seconds. The exact time varies by manufacturer, but holding it for 30 seconds is a safe bet.
  4. Watch the lights. While holding the button, the router's status lights will typically flash, change color, or go out and then turn back on. This is the signal that the reset process has begun.
  5. Release and wait. After the lights indicate a successful reset, release the button. The router will automatically reboot, which can take several minutes. Do not unplug it during this process.
Global talent pool