If you want to deploy TeamViewer in the Classic UI, you can add the command parameter CLASSICUI=1 to your command line.
We would recommend the following command lines:
Knowledge Base
Deploy TeamViewer (Host or full client)
Last Modified: Mar 19, 2026
Recommended command lines
Please find below the command lines based on the module you want to deploy on your Windows devices:
Important note: Please make sure to replace [your_xxx] with your own values.
Command line for the TeamViewer Host
start /wait MSIEXEC.EXE /i "PATH_TO_MSI_FILE\TeamViewer_Host.msi" /qn CUSTOMCONFIGID=YOUR_CUSTOM_CONFIG_ID ASSIGNMENTID=YOUR_ASSIGNMENT_ID
Command line for the TeamViewer full client
start /wait MSIEXEC.EXE /i "PATH_TO_MSI_FILE\TeamViewer_Full.msi" /qn CUSTOMCONFIGID=YOUR_CUSTOM_CONFIG_ID ASSIGNMENTID=YOUR_ASSIGNMENT_ID
Note: If a custom Host configuration ID is used with the assignment parameter and includes a rollout configuration:
Main parameters for Windows
We will explain here the parameters we used in our recommended scripts for devices:
msiexec.exe /i
Installs the package.
/qn
Allows the silent installation.
“PATH_TO_MSI_FILE\TeamViewer_Host.msi”
Defines the installation path.
Note: It can also be on a network path.
CUSTOMCONFIGID=xxxxxx
Applies your module's customization.
Note: This only applies to the TeamViewer Host.
SETTINGSFILE=”YOURPATH\yourfilename.tvopt”
Imports TeamViewer options.
For more information, please read the following article:
Export settings for deployment
Note: The value must be a valid absolute local path or a path to a network share.
Don't use this parameter in combination with IMPORTREGFILE.
ENABLEOUTLOOKPLUGIN=true or false
Controls the de-/activation of the Outlook plugin.
true: The TeamViewer Outlook plugin is activated after installation (default)
false: The TeamViewer Outlook plugin is deactivated after the installation
INSTALLSECURITYKEYREDIRECTION= 0 or 1
Installs a virtual device driver required for the security key redirection feature that allows the use of smart cards and fido-based devices through a TeamViewer session.
0: Does not install the driver (Default)
1: Installs the driver
Desktop shortcut
It will prevent the desktop shortcuts from being installed.
msiexec /i "Path\To\TeamViewer.msi" /qn ADDLOCAL=ALL REMOVE=f.DesktopShortcut
Note: If you deployed the TeamViewer Host in the past using the MSI file with the option DESKTOPSHORTCUTS=0, and now want to get rid of the shortcut, use the following command:
msiexec /i "Path\To\TeamViewer.msi" /qn REMOVE=f.DesktopShortcut
Install the TeamViewer VPN
Install the TeamViewer VPN driver with the following parameter:
INSTALLVPN=1
Retries
--retries
The assignment is retried in case of temporary errors. Note that there is a waiting time of 1 second between each try.
Timeout
--timeout
Set the overall timeout in seconds used for all assignment tries.
Example:
TeamViewer.exe assignment --id YOUR_ASSIGNMENT_ID
--retries=3 --timeout=120
CLASSICUI=1
Installs TeamViewer with the Classic UI.
Error codes
| Error code | Description | Problem/solution |
|---|---|---|
1 | Invalid command line arguments | You seem to have misspelled or used a wrong command. Check your command and try again. |
2 | Signature verification error | - |
3 | Product not installed | TeamViewer is not installed. Install TeamViewer before doing an assignment. |
4 | Service config - access failed | // ComAPI The assignment configuration could not be verified against the TeamViewer Cloud. Please try again later. |
400 (40 under Linux/FreeBSD) | MDv2Assignment - invalid argument | There seems to be an error in the command line syntax or an invalid assignment ID is used. Please check your overall command line syntax and verify that the copied assignment ID is a valid configuration from the Management Console. |
401 (41 under Linux/FreeBSD) | MDv2Assignment - service not running | The assignment can't be done because TeamViewer is not running properly. Please verify that the TeamViewer service is running. |
402 (42 under Linux/FreeBSD) | MDv2Assignment - service incompatible version | The TeamViewer service is incompatible with the executed TeamViewer client version. It seems that the installation wasn't completed properly. Please check the installation and if necessary re-install TeamViewer again. |
403 (43 under Linux/FreeBSD) | MDv2Assignment - not online | The TeamViewer client could not connect to the TeamViewer cloud in order to assign your device. Please check if the client is online and if your internet connection works properly and re-try the assignment. Consider using the retries option on the command line interface if that happens frequently. |
404 (44 under Linux/FreeBSD) | MDv2Assignment - already running | Another assignment process is already running. Please check the status of that assignment. You can do that for example by checking if the device is already registered as a managed device in the Management Console. |
405 (45 under Linux/FreeBSD) | MDv2Assignment - timeout | Your assignment attempt was timed out. Please try again. Consider increasing the timeout on the command line interface in case this happens frequently and/or the network is unstable e.g. mobile ones. |
406 (46 under Linux/FreeBSD) | MDv2Assignment - failed | Your assignment failed due to unknown reasons. Please save your logs and contact support. |
407 (47 under Linux/FreeBSD) | MDv2Assignment - access denied | You don't have the necessary permission to execute an assignment. Ensure that your user has local administrator rights. |
408 (48 under Linux/FreeBSD) | MDv2Assignment - Denied by policy | The TeamViewer policy active on this device prevents removing the existing assignment state. Please disable the policy in the Management Console. |
409 | MDv2Assignment - Device already managed | The device is already assigned to your company with the same assignment ID. |
TeamViewer provides a dedicated ZIP archive for macOS deployment. This package can be downloaded directly through the TeamViewer Remote interface or from the Management Console when you are logged in to your account.
This article applies to Corporate and Tensor license holders who want to deploy TeamViewer (version 15 or newer) on their macOS devices.
Note: To deploy the TeamViewer Remote interface for Tensor users, a TeamViewer interface policy (and, therefore, a managed device) will be required.
Download the ZIP archive
To download the ZIP archive containing the deployment packages, please follow the instructions below:
- From the web app: Go to https://web.teamviewer.com/management-portal/organization/rollout-configuration
- From TeamViewer Remote: Go to Admin settings ➜ Rollout set-up
Once you click the Download installer button, you can select the PKG (Host & Full Client for macOS).
Inside the macOS deployment packages archive
The ZIP archive includes several key resources designed to make the rollout process straightforward and efficient.
Read Me file
The Read Me file contains the most current instructions for deployment. This document should always be your primary reference, as it provides up-to-date guidance and ensures that you are following the most current deployment steps.
Deployment packages
TeamViewer offers two different installer packages for mass deployment on macOS: one for the full client and one for the Host module.
They differ slightly from the installers available from the TeamViewer download website to make mass rollout easier:
- The package for the full TeamViewer client configures TeamViewer to start with macOS by default (Host always starts with macOS).
- Both packages perform a silent installation to avoid unnecessary setup assistants or similar pop-ups during and immediately after installation.
Example scripts
You will also find example scripts for device assignment and for setting up Conditional Access (Conditional Access is available exclusively to Tensor customers).
macOS devices & MDM systems
If you manage macOS devices in your organizations through an MDM system, you can use Privacy Preferences Policy Control (PPPC) payloads to configure these permissions. Your users will still need to grant Screen Recording access themselves.