It is possible to see the full Specifications and the Quick Start Guide.
Please note that the HD4000 can be used with Zebra TC5x or TC7x series devices.
6. Allow all the other Permission Pop-ups that come. You should then be prompted to the "Start Setup" screen.
Now we will move towards the next section of the installation. Please keep the Smartglass intact. You will need to continue from this stage next time.
For more information, please see the Connecting to Wi-Fi & Setting Up Frontline Workplace section of the Frontline Workplace guide.
To be able to work with the internal scanner of the Zebra TC57 or TC72, the following steps need to be followed.
1. Open the pre-installed DataWedge app on your Zebra device.
2. Tap on the three dots on the top right and select New Profile. Name it Frontline.
3. The profile should appear on the home screen, tap on it. Make sure that this profile is enabled.
4. Open the Associated apps.
5. Tap on the three dots on the top right and select New app/activity.
6. Scroll down and select the following Frontline apps
7. Make sure that the Barcode Input is enabled.
8. Make sure that the Keystroke output is enabled.
9. Make sure that the Intent Output is enabled and enter the following information for this section.
10. The profile is ready to be used.